- Electronic fuel injection
- Heavy-duty welded frame
- Power steering for quick, precise control
- 4-year/700-hour bumper-to-bumper warranty
- Home
- New Equipment
- Used Inventory
- Departments
- Specials
- Company Info
- Contact Us
- Customer Portal
MENUMENU
John Deere X730 Lawn Tractor
John Deere X730 Lawn Tractor
| Power | 25.5 hp 19 kW | |||
|---|---|---|---|---|
| Displacement | 45.5 cu in. 745 cc | |||
| Manufacturer/model | FD750D EFI | |||
| Type | Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter | |||
| Cylinders | V-twin, cast-iron liners | |||
| Governor | Mechanical | |||
| Choke/speed control | No choke required | |||
| Cooling method | Liquid | |||
| Air cleaner | Dry, replaceable with foam precleaner | |||
| Oil drain | No tools |
Fuel
| Type | Gasoline | |||
|---|---|---|---|---|
| Fuel delivery | Electronic fuel injection | |||
| Fuel gauge | Gauge on dash | |||
| Fuel tank location | Rear | |||
| Fuel fill opening | On left fender, 3 in. 7.6 cm | |||
| Fuel tank capacity | 5.2 U.S. gal. 19.7 L |
| Battery | 12 V 300 CCA | |||
|---|---|---|---|---|
| Charging system | Flywheel alternator, regulated, 20 amp | |||
| Engine starter | Solenoid shift | |||
| Hourmeter | Yes | |||
| Headlights | Two standard, halogen, 37 W | |||
| Taillights or reflector | Taillights | |||
| Backup lights | Yes | |||
| Rear work lights | Yes | |||
| 12-V outlet | Yes |
| Type | K90 hydrostatic integrated with transaxle | |||
|---|---|---|---|---|
| Control | Twin Touch? pedals | |||
| Cruise control | Yes | |||
| Oil cooler | Yes | |||
| Oil filter | Replaceable suction side 10 micron | |||
| Differential lock | Standard | |||
| Forward speed | 0-8.5 mph 0-13.7 km/h | |||
| Reverse speed | 0-6 mph 0-9.7 km/h | |||
| Brakes | Internal wet disc |
| Frame | Welded heavy-duty | |||
|---|---|---|---|---|
| Primer/paint | E-coat/powder | |||
| Weight bracket | Standard front – holds up to four Quik-Tatch weights, 42 lb 19 kg | |||
| Receiver hitch | Yes, front | |||
| Front axle | JDM BA8 nodular iron casting | |||
| Spindle bushings | Metal, replaceable | |||
| Front tires | 18×8.5-8 turf | |||
| Rear tires | 26×12-12 turf | |||
| Hood material | Noryl GTX902, painted | |||
| Fender deck material | RIM with in-mold paint | |||
| Floor mats | Sure-grip rubber | |||
| Storage | Covered toolbox | |||
| Service interval decal | Yes | |||
| Fender handles/grips | Handles | |||
| Cup holder | Yes | |||
| Equipment mounting | Optional category 1 3-point hitch |
| Type | Hydraulic power | |||
|---|---|---|---|---|
| All-wheel steer | Not available on this model | |||
| Steering wheel | 14 in. 35.6 cm | |||
| Tilt steering wheel | Standard, six position | |||
| Turning radius | 25 in. 63.5 cm | |||
| Uncut circle radius | 54 HC, 32 in. 81.3 cm 60 HC, 28 in. 71.1 cm |
| Type | Two piece professional high back | |||
|---|---|---|---|---|
| Seat back height | 21 in. 53.3 cm | |||
| Armrests | Optional | |||
| Fore-aft adjustment | While seated, slide rail, 14-position, 7 in. 17.8 cm | |||
| Seat suspension | Six-position parallel arm |
| Type | Two-function hydraulic | |||
|---|---|---|---|---|
| Hydraulic outlets | Four, standard | |||
| Mower cut height | 1-5.25 in. 2.5-13.3 cm | |||
| Cut height increments | 0.25 in. 0.64 cm | |||
| Preset cut height | Yes |
| Type | Side discharge | |||
|---|---|---|---|---|
| Cutting width | 48, 54, 60 in. 122, 137, 152 cm | |||
| Construction | Stamped steel deck shell | |||
| Mower deck material | 48A, 10 gauge 0.135 in. 3.4 mm 54 HC and 60 HC, 9 gauge 0.15 in. 3.8 mm | |||
| Mower wash port | Yes | |||
| Mower drive system | Hydraulic clutch, shaft | |||
| Mower wheels | Four | |||
| Mower wheel adjustment | Spring-loaded pin | |||
| Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
| Height | 51.2 in. 130 cm | |||
|---|---|---|---|---|
| Overall length | 75 in. 190.5 cm | |||
| Wheelbase | 54.5 in. 138.4 cm | |||
| Width with mower | 48A, 62.5 in. 159 cm 54 HC, 64.5 in. 163.8 cm 60 HC, 74 in. 188 cm | |||
| Width with mower (deflector raised for storage) | 48A, 53.6 in. 136 cm 54 HC, 57.5 in. 146.1 cm 60 HC, 62 in. 157.5 cm | |||
| Width without mower | 47 in. 119.4 cm | |||
| Weight | No fuel or mower, 868 lb 393.7 kg |
| Condition | New |
| Category | Residential Mowing |
| Sub Category | Lawn & Garden Tractors |
| Manufacturer | John Deere |
| Model | X730 |
| Series | X700 Signature Series |